Case study · Walo Bertschinger
Saving construction millions: up to 40% lower fuel cost, ~50% less CO₂
4QT's first construction pilot ran the hybrid-electric core at full power and measured up to 40% lower fuel costs and around 50% less CO₂, without trading away performance.

Lower fuel costs (up to)
Less CO₂
Power retained
- Machine
- 4QT hybrid all-wheel dumper
- Location
- Switzerland
- Duration
- Pilot deployments, 2024
- Domain
- Construction
The challenge
Construction runs on diesel, and diesel runs the cost and emissions story for the whole industry. Heavy machines burn a lot of it doing stop-start work on difficult ground, exactly the duty cycle where a conventional drivetrain is least efficient. The usual electrification answer, swap to batteries and build charging and accept less power, doesn't survive a real site. The question 4QT set out to answer: can a machine cut fuel cost and CO₂ meaningfully without giving up the power operators depend on?
What we did
4QT ran its hybrid-electric core in its first product, a hybrid all-wheel dumper, tested in real operation on a Swiss pilot site in 2024, at full power rather than in a gentle demo profile. Rather than a pure-electric motor, which the duty cycles and charging logistics rule out for heavy machines, the core pairs electric drive with a highly efficient combustion engine under its own control system: it recovers energy under braking and delivers power on demand, which is what suits the constantly changing loads of a jobsite, especially on hilly or inner-city terrain.
The pilot was grounded in real customers, not a lab. Walo Bertschinger backed the project from the start, from joint specification through to regular test deployments, refining the system under real conditions. Beyond that, several contractors from Switzerland and Germany rented and thoroughly tested the hybrid dumper, with consistently positive feedback on performance, efficiency, and usability. The next step is a planned small series with Menzi Muck.
The results
Measured against conventional machines, at full power:
- Up to 40% lower fuel costs, a direct hit to the single biggest line in a machine's operating budget.
- Around 50% less CO₂, emissions roughly halved with no loss of power.
Lower fuel consumption, less maintenance, and longer operating times mean the price premium amortizes quickly, and a stronger environmental profile is increasingly a competitive advantage when bidding for tenders. As co-founder Christoph Lang put it, the core's value to the construction industry is counted in millions, because fuel cost is where the savings compound across a fleet.
Why it matters
This pilot is the economic argument for the 4QT core in construction: the savings aren't an emissions afterthought, they're an operating-cost result that pays for itself, and they come from the same hybrid-electric, by-wire architecture that makes the machine autonomy-ready. The same core also generates jobsite data for predictive maintenance, fleet management, and CO₂ accounting: cleaner and cheaper today, commandable and autonomous tomorrow, on the same core.
Our first product, a hybrid all-wheel dumper, cuts diesel consumption and operating costs significantly, at full performance.
Christoph Lang, Co-founder, 4QT
Source: 4qt-website-2026.vercel.app/news/hybrid-drive-construction-savings